Uric acid mg/dL → µmol/L

Convert uric acid from mg/dL to µmol/L

Sources last checked: 2026-11-03

Uric acid mg/dL → µmol/L

Convert uric acid from mg/dL to µmol/L

Fill in every field to see the result.

Converts units only; reference ranges depend on the laboratory, the assay and the patient.

Source: AMA Manual of Style, 11th ed. (Oxford Academic) — Units of measure converter, Table 2: Selected laboratory tests and conversion factors.Open

What is the Uric acid mg/dL → µmol/L?

Serum uric acid (urate) is reported in mg/dL by most labs in Germany, Austria, Turkey and the USA, and in µmol/L in the UK, Scandinavia, France, the Netherlands and many other countries. This converter multiplies by 59.48, which follows from the molar mass of uric acid (168.11 g/mol): 1 mg/dL = 10 mg/L, and 10 000 ÷ 168.11 ≈ 59.48 µmol/L.

When to use it

  • Comparing a mg/dL urate value with gout or CKD literature written in µmol/L
  • Following urate-lowering therapy when results come from labs using different units
  • Preparing case reports or exam answers in SI units

When not to use it

  • Urinary uric acid excretion reported per 24 h — check the unit (mg/24 h vs mmol/24 h) and convert accordingly
  • Deciding on treatment targets: these depend on the guideline and the clinical situation

How it is calculated

Uric acid (µmol/L) = uric acid (mg/dL) × 59.48

Clinical pearls and limitations

  • Converts units only; reference ranges depend on the laboratory, the assay and the patient.
  • Some tables round the factor to 59.5; the difference is clinically negligible.
  • 'Uric acid' and 'urate' refer to the same measurement in serum; at physiological pH it circulates mainly as urate.
  • Serum urate can be normal or low during an acute gout flare, so a single value does not exclude gout.
  • SI results are usually printed as whole µmol/L; do not over-interpret decimals after converting.

Frequently asked questions

How do I convert uric acid from mg/dL to µmol/L?

Multiply by 59.48. For example, 6 mg/dL × 59.48 = 356.9, about 357 µmol/L.

What is 8 mg/dL uric acid in µmol/L?

8 × 59.48 = 475.8, about 476 µmol/L.

Where does the factor 59.48 come from?

From the molar mass of uric acid, 168.11 g/mol. Dividing 10 mg/L by 168.11 mg/mmol gives 0.05948 mmol/L, i.e. 59.48 µmol/L per mg/dL.

Evidence and guidelines

  1. Primary source: AMA Manual of Style, 11th ed. (Oxford Academic) — Units of measure converter, Table 2: Selected laboratory tests and conversion factors.
  2. PubChem compound summary: uric acid (CID 1175), molecular weight 168.11 g/mol.

Have a follow-up question?

Medelix answers clinical questions from current guidelines and studies — every statement with its source.

Related calculators

Embed this calculatorFree to use on your website, intranet or teaching page. Copy the code below.
<iframe src="https://medelix.ai/en/embed/uric-acid-mgdl-to-umol" title="Uric acid mg/dL → µmol/L – Medelix" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe> <p><a href="https://medelix.ai/en/calculators/uric-acid-mg-dl-to-umol-l">Uric acid mg/dL → µmol/L calculator by Medelix</a></p>

For healthcare professionals and medical students. These tools support, and do not replace, clinical judgement. Always check results against the original source and your local protocols.